follow us

Welder Inverter MIG/MAG MMA/TIG HF PULSE Paton MFI 250 MULTIPRO (15-4) 230V


Free shipping in 24 hours

Welder Inverter MFI 250 MultiPro (15-4) 230V PATON™ is designed for semi-automatic MIG/MAG arc welding, gas shielded arc welding with TIG method and manual arc welding with MMA shielded electrode, direct current (DC) with PULSE function. The use of a completely electronic control method in this series excludes defects that are characteristic of multifunctional systems. […]


Welder Inverter MFI 250 MultiPro (15-4) 230V PATON™ is designed for semi-automatic MIG/MAG arc welding, gas shielded arc welding with TIG method and manual arc welding with MMA shielded electrode, direct current (DC) with PULSE function. The use of a completely electronic control method in this series excludes defects that are characteristic of multifunctional systems. In a fully electronic system, the control system has absolutely all the resources of the source, within the limits of its full power and regardless of which method is used.


The Multi-professional series devices are designed for semi-industrial and industrial use, the source can be separated from the welding wire feeding mechanism for convenience and safety. They provide a 70% duty cycle at full rated current of 250 A without loss of performance or quality. This makes it possible to use solid wire from 0.6 … 1.2 mm in the GMAW method and a coated electrode from 1.6 … 6 mm SMAW. It is possible to replace the polarity for welding self shielding wire (FCAW). For hazardous conditions, a MMA Idle Voltage Derating Unit has been built into this unit, with the possibility of switching it on and off. After the welding process is completed, the voltage at the source terminals is reduced to a safe level of 12 V within 0.1 seconds.


These Multi-Professional Series welding units are protected against ingress of foreign particles more than 12.5 mm in size and against rain drops if the rain drops fall at an angle to the vertical surfaces of the welding unit does not impair its operation. Welder inverter is allowed for outdoor operation in temperature -25 + 45 ºС . The internal electrical and electronic elements of the welding unit are protected against moisture but are not protected against atmospheric condensate drops.


The characteristic feature of the PATON™ semi-automatic machines of the “Multi-Professional” series is the high quality, sealed, metallic wire feeder, as well as the existing KZ-2 “EURO” type connector, which has become a standard in the world, allowing the user to change the holder at his own discretion in the future. In this model, the feeder is equipped with 4 wire feed rollers, we can use a spool up to 18 kg and a 5-meter welding gun. Due to their compact and robust design, the Multi-Professional Series of welding machines are ideal for field work and semi-industrial conditions. The small size of the machine makes it very mobile.


Features & Benefits:

The high quality of the welds and the safety of the Welder Inverter MFI 250 are ensured by additional adjustable functions


FAN STOP: Adaptive fan, a solution which increases the life of the fan itself and additionally reduces the amount of dust in the device itself. The speed of the fan increases at the beginning of work and when it is heated up, and decreases when the welder is cooled down.


PULSED WELDING FUNCTION: This function is designed to simplify the control of a welding process in various spatial welding positions, excluding a flat welding position. This function is also used in welding nonferrous metals. When this function is activated, the application of pulse welding current improves the mixing of molten metals in the weld area and causes forced action on the transfer of molten metal drops into the welding pool, therefore the stability of the weld formation and the stability of the welding process are improved.


INDUCTANCE CONTROL FUNCTION: Inductance control allows optimization of the arc characteristics according to the welded thickness element and welding method and conditions. This function is necessary to change the slew rate of the current when the arc voltage changes. The thinner the element to be welded with the met MIG/MAG the inductance should be higher (soft arc – less fusion), for thick elements vice versa (hard arc – greater embedding).


TIG 2T/4T CONTACTLESS ARC STARTING FUNCTION: This function of the control button on the welding torch. Welder Inverter MFI 250 Multi-PRO contains a module for contactless arc starting (an oscillator) and an integrated gas supply valve. When the control button of the welding torch is pressed, the control signal is generated and transmitted to the controller of the welding machine. On this control signal, the gas supply valve will be opened for purging the weld area with gas before welding, the welding inverter will be switched on, with delay, and a high-voltage pulse for the contactless arc starting will be generated. After these operations, all the other functions, specified with consideration for the operational cycle of this welding process, will be performed.

When the button is released, the welding current will decrease linearly, the welding unit will be switched off, and the weld area will be purged with gas. After these operations, the gas supply valve will be closed with delay.


Welder Inverter MFI 250 MULTIPRO (15-4) PATON™ have a stabilization system, so they can be powered from the aggregate, also operates at full nominal current with a 60 m long on extension cable and a 2.5 mm diameter.


Electrode diameter (mm)Set welding current in the MMA and TIG welding processesElectrode wire diameter in the MIG/MAG welding processMinimum power of the generator
Ф 2Not more than 80 АNot more than Ф0,6 mm2,9 kVA
Ф 3Not more than 120 АNot more than Ф0,8 mm4,5 kVA
Ф 4Not more than 160 АNot more than Ф1,0 mm6,2 kVA
Ф 5Not more than 200 АNot more than Ф1,0 mm8,0 kVA
Ф 6 for a free-melting electrodeUp to 250 АUp to Ф1,2 mm11,0 kVA


It is worth noting that the welding parameters fully correspond to the real working parameters of the welder, which is defined by the use of high-quality electronic components with thorough control at each stage of production.


The kit includes:

  • Welder Inverter PATON™ MFI 250 MULTIPRO DC (15-4) 230V
  • The welding cable 3 m in length with an ABICOR BINZEL™ DE2300 electrode holder
  • The welding cable 3 m in length with a ABICOR BINZEL™ MK300 grounding clamp
  • Wire feeder rolls 4x (0.8 – 1.0),4x (1.2 – 1.6) V + 4x (0.8 – 1.0) U
  • Welding wire spool cover
  • Gas quick connector
  • The shoulder-carry belt
  • The operation manual

Compared to inverter welders from other manufacturers, this product was invented by the designers of the Pilot Plant of Welding Equipment of the Electric Welding Institute named after E. O. Paton, has the following advantages:

  • Wide range of adjustment of welding parameters:
    MMA method – 1 (basic) + 10 (additional)
    TIG method – 1 (basic) + 10 (additional)
    MIG/MAG method – 2 (basic) + 8 (additional)
  • Pulsed welding function, which is programmable in all welding modes.
  • Installed module for contactless arc ignition (initiation of welding with high voltage of kV)
  • In addition to the protection against mains voltage surges, the devices are equipped with a stabilization system for longer voltage changes in a single-phase power network and enable proper operation of the device for the voltage range from 160 V to 260 V. It is worth remembering that at the minimum voltage of 160 V, it is possible to perform welding with an electrode with a diameter of no more than Ф 3 mm or semi-automatic welding with a wire with a diameter of no more than Ф 0.8 mm.
  • Adapted to the standard power grid. Thanks to its high efficiency, the source provides twice as much electricity demand as traditional sources
  • Automatically adjusts the speed of the fan, which works with higher efficiency when the unit is warmed up, and reduces the speed when the unit is not in use. This affects the wear of the fan, reduces the amount of dust in the unit and the noise during welding.
  • Convenience of working with a nominal current load of the device, without the need for cooling interruptions at 25 °C.
  • High reliability of the device in production conditions with high dustiness and high humidity.
  • The device is equipped with a thermal protection system which protects all elements generating heat of the welding unit against overheating.
  • All electronic components of the device are impregnated with two layers of high quality lacquer, which ensures the reliability of the product during its entire lifetime
  • Improved stability of the electric arc glow
  • Reliability thanks to the use of the latest advanced IGBT technology.
  • The small size and weight of the device do not affect the technical performance of the welder, but facilitate welding in difficult places.
Rated power supply voltage 50/60 Hz
230 V

Rated power supply current
32 – 36 A
Rated welding current
250 A
Maximum operating current
335 A

Operating load factor %
70% – 250 А
100% – 208 А
Power supply voltage range
160 – 260 V
Welding current control range
12 – 250 A
Welding current control range
12 – 28 V
Wire feeding speed control range
2,0 – 16 m/min
Diameter of a stick electrode
1,6 – 6,0 mm
Number of pressure rolls4
Diameter of electrode wire
0,6 – 1,6 mm
Coil weight,
≤18 kg
Non-contact arc ignition (HF)Yes
Welding processes with a pulse welding mode
Function "Arc-Force"
Function "Hot-Start"
Function "Anti-Stick"
Reduction of open-circuit voltage
Reduction of open-circuit voltage
Open-circuit voltage
12 / 75 V
Welding arc starting voltage
110 V
Rated consumed power
6,9 … 7,7 kVA
Maximum consumed power
8,5 … 11,0 kVA
Efficiency coefficient
Operating temperature range
–25 … +45 ºС
Fulfilled standards:
"EN 60204 – 1:2006
EN 60974 – 1:2012
EN 60974 – 10:2014"
Overall dimensions (length, width, height)
460 х 250 х 346
Protection class*
IP 21


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.