0,00 zł
Copper and uncoppered welding wire – 6 advantages of uncoppered wire
Greater depth of fusion, cleaner welds, less spatter or much less harm to the welder – these are just some of the key advantages of non-coppered wire, which has become increasingly popular in recent years.
In this article, we take a closer look at copper and non-copper welding wire, their differences and advantages, to help you choose the right type of wire for your welding jobs.
This article includes:
- An introduction to the division of welding wires.
- A discussion of the differences between copper and non-copper welding wire, including outer material, application and performance.
- An overview of the advantages and disadvantages of each type of welding wire, including weld quality, ease of use, cost, applications and health issues for the welder.
- A summary and recommendations for choosing the right welding wire depending on the project.
Table of contents
ToggleDifference between copper and non-coppered wire
MIG/MAG welding is one of the most important metal joining techniques used in many industries, including automotive, construction and metalworking. Different types of welding wire are used within this technique, including copper-plated and non-copper-plated.
Although both types of wire perform a similar function, there are important differences between them that many welders are completely unaware of due to the fact that they have never come to use welding wire without a copper coating.
First of all, copper-coated and non-copper-coated welding wire differ in the material from which their outer surfaces are made.
Uncoppered welding wire has an outer surface made of pure weld metal (e.g. low-alloy steel, stainless steel or aluminium), while copper-plated welding wire has an outer surface coated with a thin layer of copper.
The copper coating is intended to increase welding efficiency by reducing the electrical resistance of the wire surface and improving heat dissipation. In practice, however, the copper coating causes several problems in the welding process, which we will discuss in later paragraphs.
In the case of non-coppered wire, it is coated with an antifriction, conductive coating with anti-corrosion properties, which is much thinner than copper, completely eliminating weld de-lamination and cracking. It also rules out all the problems associated with copper particle contamination of welding equipment.
Advantages of non-coppered wire
So what are the main advantages of unbored wire?
Greater penetration depth
Tests clearly show that uncoppered wire has a much greater depth of fusion, as can be seen in the attached image.
Cleaner welds and less chipping
Compared to traditional copper welding wires, copper-free wire eliminates the process of copper electroplating on the surface of the material to be welded, which significantly reduces contamination of the weld.
Much less welding smoke – less harmful for the welder
When welding with copper-coated wire, smoke is produced due to the generation of copper fumes. When welding with non-copper-coated wire, blue or white smoke is produced, which means that this smoke does not contain the Cu element and is much less harmful to welders.
In MIG/MAG welding, the smoke is primarily produced by oxidation of the metal vapour and copper is the main harmful element produced during the work. It should be noted that non-coppered wires are not completely free of copper content – however, the copper content in them is about 0.15%, which is marginal.
Statistics show that the amount of smoke produced from uncoated wire is about 20 per cent lower than that from copper-coated wire. In short, this means that being in an environment where we weld with this type of welding wire is much less hazardous to the welder’s health – firstly because there is no inhalation of copper fumes, and secondly because there is much less smoke.
Improved arc stability and wire feeding performance
The special surface treatment process of the non-coppered wire means that it does not shed the copper-coated layer, which means it can maintain a more stable wire feed for a long time, even in a high-speed condition, resulting in higher welding and deposition rates.
Longer life of welding equipment
With copper wire, copper passes through the wire feeder and weld holder, crumbling and clogging the wire guides. This causes the wire to wear faster.
With non-copper coated wire, this problem does not occur – which in turn allows the welder to make significant savings on the current tips precisely.
Greater durability
It is a common misconception that a copper layer is more resistant to rust, as iron is more active than copper. However, the results of a corrosion test in a salt chamber where professional corrosion resistance tests are carried out (temperature 30℃, humidity 80%, stay in 0.01% NaCl solution for 2 hours) show that the corrosion of copper-coated wire is much greater than that of non-copper-coated wire.
The severe corrosion of copper-coated wire was found to be due to the rapid corrosion of the galvanic cells, which readily form where the fine copper layer cracks or flakes off.
In contrast, the surface of uncoated wire does not come into contact with other metals and will not form galvanic cells, which means that its anti-rust ability is better than that of copper-coated wire.
Disadvantages of non-copper coated wire
Unfortunately, everything has its two sides of the coin, so let’s now turn to the two main disadvantages of non-copper coated welding wire.
Higher price
Unfortunately, as the quality of welding increases, so does the price. Unwelded wire is significantly more expensive than its copper-coated counterpart. This is, of course, due to two factors – firstly, the chemical composition of the wire consists of much more expensive components.
Secondly, most copper-plated wire is on a plastic basket, which also saves on price.
Uncoppered wire is found almost exclusively on metal baskets, which of course makes them much more resistant to breakage or other defects, but at the same time they are also more expensive.
Fewer types of wire and lower availability
Copper-plated wire is available in far more variants than its uncoppered counterpart.
In addition, it is much harder to buy uncoppered wire due to the fact that, despite its very good properties and better weld quality, to this day many retailers do not offer it.
Advantages of copper-plated wire
What are the advantages of the most commonly used welding wire?
Lower price
Copper-plated wire is considerably cheaper than wire without a copper coating. This makes welders looking to save money on fast-wearing welding consumables more likely to opt for it.
Popularity
Copper coated wire is much more popular than un-copper coated wire. For this reason, many welders who have been accustomed to using this type of wire for years are reluctant to change to another type of wire.
Multiple applications
Copper welding wire is widely used in a variety of industries, including chemicals, refining, automotive, industrial and construction.
Disadvantages of copper wire
So let’s move on to the main copper coated wire.
Higher fume emissions – greater harm to the welder
As stated above, the higher amount of welding smoke and copper fumes that are produced during the welding process with copper-coated wire undoubtedly pose additional health risks to the welder.
Therefore, if you frequently weld in enclosed spaces with low ventilation levels, it is worth considering a permanent change of the wire used – not only for the sake of better weld quality or strength, but above all precisely for health reasons.
Much lower resistance during long-term storage
Copper welding wires are more susceptible to corrosion and mechanical damage, which makes it more difficult to store them long-term and maintain the same quality.
Less welding precision
Due to the larger diameter of the copper coating, copper-plated welding wires have lower welding precision compared to non-copper-plated wires.
Plastic cages with low resistance
Most copper wires are on plastic baskets, which means that they are much more susceptible to damage, breakage or even fracture.
Greater contamination of welding equipment
The copper that passes through the wire feeder and welding fixture crumbles, which causes clogging of the wire guide and faster wear of the current tips.
Bottom line – which wire to choose?
At the end of the day, we need to remember that choosing the right welding wire for the job depends on several factors, such as the type of material, material thickness, type of joint, welding technique and the mechanical strength requirements of the weld.
However, if we often weld materials such as unalloyed steels, low-alloy carbon-manganese steels and structural steels – it is definitely worth trying an unbored wire, not only for higher productivity, better welds, but above all for health reasons.
Polecane dla Ciebie
- Welding torch TIG ABICOR BINZEL ABITIG GRIP 17 4m PRICE ON REQUEST
- Wire spool cassette PRICE ON REQUEST
- Welding Feeder MIG/MAG DC PATON BPI 250 PRO (15-2) PRICE ON REQUEST
PATON Europe LTD
4 Kapitałowa Street
35-213 Rzeszów
VAT EU: PL8133751525
E-mail: sale@patonwelders.com
Phone: +48 17 742 11 11
Strona stworzona i obsługiwana przez: Agencja Marketingowa DIGITIX
Copyright 2024 © PATON Europe Sp. z o. o.
- Image
- SKU
- Rating
- Price
- Stock
- Availability
- Add to cart
- Description
- Content
- Weight
- Dimensions
- Additional information
Strona stworzona i obsługiwana przez: Agencja Marketingowa DIGITIX
Copyright 2024 © PATON Europe Sp. z o. o.